OPP LABELING MACHINE(HOT GLUE-OPP SYSTEM)

Specifications

  • The machine is covered with protective frames according to the “CE” normsThe surface of the machine body is made of st material and covered with 304k stainless material.
  • Mechanical chassis legs and the chasis itself is completely made of stainless steel materials
  • It has helezon that ensures a regular bottle flow.
  • Bottle flow can be stopped automatically or manually when desired.

  • Special bottle tape is used to make easy connection with filling lines and to prevent the bottle from twisting.
  • It stops automaticly when label coil runs out.
  • The machine has a system that ensures that the tension of the labels is high when it stops and starts again
  • The label coil that is activated when the machine stops and starts has an automatic braking system.
  • Possibility to change only the glue receiving parts in the label carrier drum.
  • Depending on the bottle flow, it can increase its speed and slow down automatically.
  • The touch screen of the machine provides ease of use for the user.
  • Label sizes can be adjusted from the touch screen.
  • It automatically adjusts according to the length of the label and does not require operator intervention. It is very easy and simpleto use. The difference from other machines isvery low label loss. Glue consumption is lower than other machines.
  • Format changes can be made in 15 minutes. It does not interfere with production. It is the fastest changing machine.

    • TECHNICAL SPECIFICATIONS / TEKNİK ÖZELLİKLER
    Anma Hızı / Rated Speed12.000 Etiket/Saat Labels/Hour
    Şişe Çapı / Container DiameterØ 45 - ø120 mm
    Etiket Boyu / Label Length145mm - 385mm
    Etiket Yüksekliği / Label HeightMin. 25 Max. 185 mm
    Min. Etiket Yapıştırma Yüksekliği/ Min. Labeling Height2 mm
    Max. Etiket Yapıştırma Yüksekliği/ Max. Labeling Height260 mm
    Kurulu Güç / Installed power1.5 kw motor - 16 kw
    Basınçlı Hava Kullanımı / Compressed Air6 bar - 35 Nlt/min
    Ağırlık / Weight650 kg
    Boyutlar / Dimensions3500-1200-1240mm
  • It is always under the control of the operator with the touch panel. There is a separate recording program for each different product. Once the product values are stored in the memory, only the desired format is selected and the machine automatically makes all its settings according to that format.
  • All heaters, sensors, timers are set up from the touch panel and their values are read from there. Our panel is designed to be simple, legible and easy to use. This is why setting up the machine is easy for the operator.
  • Errors are shown on the panel respectively as a flasher. The machine makes changes according to the status of errors and guides the operator.
  • The panel of our machine is wide and spacious. Lighting ensures easy operation even in the dark. Our panel can be opened and the mechanical parts can be easily maintained under the machine.
  • Conveyor system 3 mt. long. Conveyor, machine chassis, upper table and many parts are stainless.
  • Label tension system design is perfect. It provides synchronization according to the working speed. Makes a problem-free stretching.
  • SENSORS: There is a label over sensor, sensors at the conveyor inputs and outputs, the sensor indicating the arrival of the label on the drum (for gluing), and a color sensor that reads the barcodes on the label.